Hardware Specifications


Vendor/Brand	LEOX
Model	LXT-240G-C1
Chipset	Realtek RTL9607C
Flash	SPI NAND 256MB
RAM	196MB visible in top (256MB total?)
CPU	Formosa MIPS interAptiv (multi) V2.0
CPU Clock	300MHz (597.60 BogoMIPS)
System	Linux 4.4.140 (GCC Realtek MSDK-4.8.5p1 Build 3068)
Ethernet ports	4x1G
POTS ports	2xRJ11
Optics	SC/APC
IP address	192.168.1.1/24
Web Gui	✅ user `admin`, password `letmein` OR user `user`, password `user`
Telnet	✅ user `leox`, password `leolabs_7`
SSH	NO
Form Factor	ONT

External Photos

List of partitions (MTD)

dev	size	erasesize	name
mtd0	000c0000	00020000	“boot”
mtd1	00020000	00020000	“env”
mtd2	00020000	00020000	“env2”
mtd3	00040000	00020000	“static_conf”
mtd4	0f9c0000	00020000	“ubi_device”
mtd5	00a89000	0001f000	“ubi_Config”
mtd6	00a0d000	0001f000	“ubi_k0”
mtd7	01911000	0001f000	“ubi_r0”
mtd8	00a0d000	0001f000	“ubi_k1”
mtd9	01911000	0001f000	“ubi_r1”
mtd10	0081d000	0001f000	“ubi_framework1”
mtd11	0081d000	0001f000	“ubi_framework2”
mtd12	02416000	0001f000	“ubi_apps”

Only the first 4 partitions with erasesize 0x20000 should be manipulated using mtd devices, the fifth partition ubi_device contains the rest of the NAND and is to be manipulated using ubi volumes

List of volumes (UBI)

dev	size	type	name
ubi0_0	11046912B	dynamic	“ubi_Config”
ubi0_1	10539008B	dynamic	“ubi_k0”
ubi0_2	26284032B	dynamic	“ubi_r0”
ubi0_3	10539008B	dynamic	“ubi_k1”
ubi0_4	26284032B	dynamic	“ubi_r1”
ubi0_5	8507392B	dynamic	“ubi_framework1”
ubi0_6	8507392B	dynamic	“ubi_framework2”
ubi0_7	37838848B	dynamic	“ubi_apps”

To back up a volume, cat or dd the appropriate /dev/ubi0_X device to a file or pipe, to restore a volume, use the ubiupdatevol utility (or just do it safely via the WebGUI)

This ONT supports dual boot.

Volumes ubi_k0 and ubi_r0 respectively contain kernel and rootfs of the first image, while ubi_k1 and ubi_r1 contain kernel and rootfs of the second one.

List of software versions

V4.1.1L5rc2 md5hash: 53b80abbda413e3ebc87d1730292d2fd
V4.1.1L5 md5hash: 5426cac6eb204ec1b3a8f39bc22d9488, same as rc2 just marked final

GPON/OMCI settings

Set OMCI mode to customized so versions don’t reset

mib set OMCI_OLT_MODE 3

Setting OMCI software version (ME 7)

mib set OMCI_SW_VER1 YOURSWVER
mib set OMCI_SW_VER2 YOURSWVER

Setting OMCI vendor ID (ME 256)

flash set PON_VENDOR_ID VEND

Setting ONU GPON Serial Number

flash set GPON_SN VEND1234ABCD

Setting OMCI hardware version (ME 256)

flash set HW_HWVER YOURHWVER

Setting OMCC version (ME 257)

mib set OMCC_VER 0x86

Setting OMCI equipment ID (ME 257)

flash set GPON_ONU_MODEL YOUREQUIPMENTID

Setting Product Code (ME 257)

mib set OMCI_VENDOR_PRODUCT_CODE 0x3032

Setting VEIP slot ID (example for 0xe01)

mib set OMCI_VEIP_SLOT_ID 0xe

Verification commands for settings changed above (all settings take a reboot to apply)

Verify SwVer (ME 7)

omcicli mib get 7

Verify Vendor ID, HwVer, and G984 Serial (ME 256)

omcicli mib get 256

Verify OMCC version, Equipment ID and Product Code (ME 257)

omcicli mib get 257

Verify VEIP customized slot ID (ME 329)

omcicli mib get 329

Advanced settings

Setting management IP

mib set LAN_IP_ADDR 192.168.102.1