Skip to main content Link Search Menu Expand Document Warning Info Success Info (external link) Copy Copied Following system colour scheme Selected dark colour scheme Selected light colour scheme Telegram GitHub Edit

GPON ONU status

Querying a particular OMCI ME meg MIB_IDX ME_IN

Where MIB_IDX is the MIB ID and ME_IN is the ME instance number

Getting/Setting Speed LAN Mode

To enable the interface to sync at 2.5 Gbps / using HSGMII with auto-neg on:

fw_setenv sgmii_mode 5

To revert the afore-mentioned command:

fw_setenv sgmii_mode

To check the set value fo the LAN Mode:

onu lanpsg 0

The link_status variable tells the current speed:

Value (for sgmii_mode and link_status) Speed
3 1 Gbps / SGMII with auto-neg on
4 1 Gbps / SGMII with auto-neg off
5 2.5 Gbps / HSGMII with auto-neg on

GPON/OMCI settings

Getting/Setting OMCI software version (ME 7)

fw_setenv image0_version V1.7.6-170626
fw_setenv image1_version V1.7.6-170626

Setting ONU GPON PLOAM password

fw_setenv nPassword "0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39"


uci set gpon.ploam.nPassword="0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39"
uci commit 

Setting ONU GPON LOID and LOID password

fw_setenv omci_loid 1234567890
fw_setenv omci_lpwd password01

If LOID is disabled in the firmware try alternative software.

Setting ONU GPON Serial Number

fw_setenv ont_serial ABCD12345678


uci set gpon.ploam.nSerial="0x48 0x57 0x54 0x43 0x9D 0xAC 0xC7 0xA3"
uci commit 

Setting and checking oem-generic

fw_setenv target oem-generic
fw_printenv target=oem-generic