Hardware Specifications
| Vendor/Brand | Huawei |
| Model | OptiXstar S800E |
| Chipset | HiSilicon SD5182S |
| BOSA | HN517X (XGS-PON) |
| Flash | |
| RAM | |
| System | |
| Host interface | GE/2.5GE/5GE/10GE adaptive (per Huawei) |
| Optics | SC/APC |
| IP address | |
| Web Gui | |
| SSH | |
| Telnet | |
| Serial | |
| Form Factor | miniONT SFP+ |
The OptiXstar S800E is an XGS-PON SFP+ ONU designed by Huawei to be plugged into the SFP+ port of cameras, access points or routers. The GPON version is the OptiXstar S600E / MA5671B: the two sticks share the same SoC (HiSilicon SD5182S) and differ only in the BOSA.
Board configuration
# S800E-M S800E
board_id=2014; pcb_id=0; soc_type=SD5182S; slic_type=NONE; ext_phy_type=NONE; bob_type=HN517X; xml_path=S800E_SD5182S/; usb=N; sd=N; rf=N; battery=N; iot=N; nfc=N; lte=N; pse_type=NONE; rs485=Y; sfp_onu=Y;Optical and electrical specifications
From the Huawei product page and datasheet (2020-06-01):
| NNI | XGS-PON, SC/APC |
| UNI | GE/2.5GE/5GE/10GE interface adaptive |
| Standard | ITU-T G.9807 |
| Maximum distance | 20 km |
| TX wavelength | 1260 ~ 1280 nm (center 1270 nm) |
| RX wavelength | 1575 ~ 1580 nm (center 1577 nm) |
| Rate | TX 9.953 Gbit/s, RX 9.953 Gbit/s |
| TX power | 4 ~ 9 dBm |
| Extinction ratio | ≥ 6 dB |
| Receiver sensitivity | ≤ -28 dBm |
| Overload | ≥ -9 dBm |
| Power supply | 3.3 V |
| Maximum power consumption | 2 W |
| Operating temperature | -40 °C ~ +85 °C (shell temperature) |
| Operating humidity | 5% ~ 95% RH (non-condensing) |
| Dimensions | 65 mm x 13.6 mm x 12.6 mm |
| Weight | about 27 g (product page), about 20 g (2020 datasheet) |
| Other | Type B dual-homing (50 ms switching), secure boot |
Supported functions: variable-length OMCI messages, rogue ONT detection and isolation, PPPoE/DHCP simulation testing, dual-system software backup and rollback, 802.1ag Ethernet OAM, optical link measurement, IGMP v2/v3 and MLD v1/v2 snooping with fast leave, 802.1p priority and SP/WRR scheduling, MAC address filtering.